My idle on Derbi senda x-treme 72cc 2-stroke with a dellorto carb 21 is too high (2000-2500rpm) and it doesnt fall. Theres not a problem with the throttle cable, there are no air leaks on the vacuums and the idle screws are adjusted fine. Also the carb is clean.What could the problem be? When i put 1st gear in theres a hit on the gearbox since the rpms are high and it will destroy it. Sometimes when i put 1st gear the engine stops after the hit.Please i need an answer fast because i am going to sell it in 3 days ...
- Motorcycle Forums
- Forum Topics
- 23 April 2013
I am going to buy a DID cain can anyone recommend a chain riviter other than the expensive km500 DID tool.I am a little dubious of the cheaper versions and would like some advice on buying a cheaper non DID tool. Do they work is the simple question or are they as some reviews suggest a waste of money. regards vic
- Motorcycle Forums
- Forum Topics
- 23 April 2013
Can some one help me,I have a Chinese lexmoto ht125-8 that my wife bought me for my birthday, it needs some work doing, I've done an oil change and cleaned the carb and changed the plugs now when I start it up the ideal speed is around 6000 rpm what do I do.It's probably a simpl answer but its my first bike and I'm following a Haynes manual.Any advice please email:ianconnor111@gmail.comCheers
- Motorcycle Forums
- Forum Topics
- 23 April 2013
Hi, help needed... Does anyone have fitting instructions for a translogic 3 quickshifter for an 04 R1 (5vy) or experience fitting one with gilles rearsets? Cheers dean
- Motorcycle Forums
- Forum Topics
- 22 April 2013
hello i was out riding yesterday on my bike, it cut out a couple of times then out of the blue completely stopped dead, the lights horn and other electrics all work but when you try to start her up nothing the starter don't turn, it's a 2000 hornet, also I tried a quick bump start and that didn't work
- Motorcycle Forums
- Forum Topics
- 22 April 2013
Ok my x7 frame is gonna get stripped and painted shortly ...going to buy a cheap shotblasting gun off e bay, was considering buying shot but a bucket of it is fifty quid .....was going to have an experiment using a bag of kiln dryed sand as the media ......any thoughts would be appreciated
- Motorcycle Forums
- Forum Topics
- 22 April 2013
Ok i've looked for the take off points on my project slabbie 750 and i aint got a manual for it so where the feck are they ? a link to a workshop manual would be great plesae
- Motorcycle Forums
- Forum Topics
- 22 April 2013
Just wondering does the Yamaha WR125X have a manual choke? and I am guessing it has an electric start too?
- Motorcycle Forums
- Forum Topics
- 21 April 2013
Read with interest last weeks MCN column on Oil advice centre. I have a different query which hopefully you can give advice on.My Buell xb12x has mineral oil specified. Having read your item, it would seem Synthetic oil may be better - running cooler - Buell issue better performing etc etc. Can I use syntheic as apposed to Mineral and if so which one would be best?
- Motorcycle Forums
- Forum Topics
- 20 April 2013
My mate's got a 1997 honda sgx50 sky moped. It has just developed a problem where by it will go from tickover to screaming revs without touching the throttle!Using a donor bike which runs fine, we have swapped carb, slide, throttle cable and auto choke. Problem stays on original bike.Any ideas anyone?
- Motorcycle Forums
- Forum Topics
- 20 April 2013
