Hi, help needed... Does anyone have fitting instructions for a translogic 3 quickshifter for an 04 R1 (5vy) or experience fitting one with gilles rearsets? Cheers dean
- Motorcycle Forums
- Forum Topics
- 22 April 2013
hello i was out riding yesterday on my bike, it cut out a couple of times then out of the blue completely stopped dead, the lights horn and other electrics all work but when you try to start her up nothing the starter don't turn, it's a 2000 hornet, also I tried a quick bump start and that didn't work
- Motorcycle Forums
- Forum Topics
- 22 April 2013
Ok my x7 frame is gonna get stripped and painted shortly ...going to buy a cheap shotblasting gun off e bay, was considering buying shot but a bucket of it is fifty quid .....was going to have an experiment using a bag of kiln dryed sand as the media ......any thoughts would be appreciated
- Motorcycle Forums
- Forum Topics
- 22 April 2013
Ok i've looked for the take off points on my project slabbie 750 and i aint got a manual for it so where the feck are they ? a link to a workshop manual would be great plesae
- Motorcycle Forums
- Forum Topics
- 22 April 2013
Just wondering does the Yamaha WR125X have a manual choke? and I am guessing it has an electric start too?
- Motorcycle Forums
- Forum Topics
- 21 April 2013
Read with interest last weeks MCN column on Oil advice centre. I have a different query which hopefully you can give advice on.My Buell xb12x has mineral oil specified. Having read your item, it would seem Synthetic oil may be better - running cooler - Buell issue better performing etc etc. Can I use syntheic as apposed to Mineral and if so which one would be best?
- Motorcycle Forums
- Forum Topics
- 20 April 2013
My mate's got a 1997 honda sgx50 sky moped. It has just developed a problem where by it will go from tickover to screaming revs without touching the throttle!Using a donor bike which runs fine, we have swapped carb, slide, throttle cable and auto choke. Problem stays on original bike.Any ideas anyone?
- Motorcycle Forums
- Forum Topics
- 20 April 2013
I have American Chopper aspirations which i'd like to make a reality as soon as possible, but there's a problem, I'm on L plates. Could a suzuki gs500 be restricted to 12.6 bhp? i want to buy a cheap runner and chop it, hard tail, goosneck the works. and if restricting a gs500 to learner legal size is possible, is there a chance that it could tow around the engine and a hard tail frame? it'll be minimalist. any insight would be appreciated.
- Motorcycle Forums
- Forum Topics
- 19 April 2013
Does anyone know what material clutch cushion rubbers are made from. I have a Honda TRX450r with worn clutch cushions and nobody makes them. I just brought a wiseco basket but will have to use the old cushions. I cant find anything on the web that helps me. I've spoken to a rubber company that might be able to make them, but I know it wont be cheap. I also need to know what sort of temps the gearbox runs at too so they can get an idea of what sort of material to use. With it being a race ...
- Motorcycle Forums
- Forum Topics
- 18 April 2013
i'm needing break down cover for my bike i had rac free for 12 months when i bought the bike, which is the best break down service i'm having rac again, how's the AA or green flag? help me out please.
- Motorcycle Forums
- Forum Topics
- 17 April 2013
