Bought a 2003 YAMAHA Dragstar last year on a whim, didn't use it a lot and have decided to this year. How do I check oil level? can't see a window and no dip on filler cap.
- Motorcycle Forums
- Forum Topics
- 17 May 2013
Hitrying to find a speedo drive for my 02 italjet millennium. I have tried italjet uk and other suppliers with no luck, so I am asking if anyone knows where I can find one or if their is a compatable one from another bikecheers
- Motorcycle Forums
- Forum Topics
- 16 May 2013
I've got a 2001 gsx750f grey import and the advisory on the mot was the headlights. Can you swap the dip and main connectors around or is it worth forking out on a uk full headlight? also is it worth swapping the dash for a uk one, its already got the gizmo to read mph instead of kph?any help on this would most appreciated and if you know where to get them cheap.Thanks
- Motorcycle Forums
- Forum Topics
- 16 May 2013
Hi new to this so would appreciate the help if possible. Right I have a 96 mk1 suzuki bandit its had a fill service 2 weeks ago but prior to this and still afterwards is a problem that is very annoying. The bike starts and runs fine until I try to open up the throttle at which point its seems likes its dumping aload of fuel into the system to which it cant burn off so the bike stutters and then the power kicks back in and it shoots off. Could anyone shed any light on this issue thanks.
- Motorcycle Forums
- Forum Topics
- 16 May 2013
I%X92m refitting the cylinder head on a VT Shadow 700c V twin OHC. The 700c was modified for the USA market and imported to the UK. I%X92ve replaced cylinder and head gaskets with ones made for the 750c as these were the only ones available and they look identical. I am unable to get any compression in either cylinder. At TDC there is clearance at the inlet and exhaust valves but as I torque the camshaft housing the gap closes and all valve springs appear to be compressed.
- Motorcycle Forums
- Forum Topics
- 13 May 2013
I just recently replaced my panels on my bike and had to change the indicators from one panel to the other. They now are having issues. I can operate the rhs indicator but not the left. This is also greeted by a buzzing on the rhs operation and a perm on position for the Lhs. Please help a new rider! Would prefer to learn how to do it myself than get someone else to fix it!
- Motorcycle Forums
- Forum Topics
- 13 May 2013
Hey, I've just had the chain and sprockets replaced on the blade and seem to be getting more miles to a tank.The way I see it, one of 2 things is happening: 1. My reserve light is broken2. Having new stuff on the bike means it's more efficient, which means I'm getting better mpg. Normally the reserve comes on around 120 miles, but I managed 135 ish before getting to a petrol station (still without the light coming on) - I haven't had a chance to ride round and round until the light either comes on or the petrol runs out yet, so ...
- Motorcycle Forums
- Forum Topics
- 13 May 2013
hi,got an 05 z750 ,want to put z1000 exhausts on ,(pipe on either side ) can any body help .cheers steve
- Motorcycle Forums
- Forum Topics
- 13 May 2013
I have a bmw r1150rt 2002 with top red brake warning light flashing four times per second with bottom red warning on constant and no servo working obviously expensive.I remember a while ago MCN printed the name of a company that converts brakes to none servo operation but I didn't own a bmw then and did not keep any info.is it possible to obtain the relevant info .thanks
- Motorcycle Forums
- Forum Topics
- 12 May 2013
HiI'm planning to flush my zx6r's coolant in a week or two, I just wanted to check what sort of water I should be using.Is this battery-water http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_165335_langId_-1_categoryId_255205#tab4that halfords is selling the right sort of stuff or do i want a different kind of prepared waterThanks very much for any tips
- Motorcycle Forums
- Forum Topics
- 12 May 2013
