Skip to content

Honda Motorcycle Products

You looked for...

and found 6 items

Results 1 - 6 of 6

leading article image
rating is 0

My Honda VFR750 won’t rev past 6000rpm

MCN, 26 November 2012 15:24

Q. My Honda VFR750FR revs and runs well in the first four gears, but struggles in fifth and sixth to get past 6000pm. It also backfires – especially at low revs. I've changed the fuel filters and air filter and the fuel pump is OK.Dr Gregory Haddock, email A. With 18 years under its belt chances are the rubber hoses ...

leading article image
rating is 0

How to remove a seized bolt from CBR600F Sport’s radiator

MCN, 07 June 2012 17:41

Q. I've a Honda CBR600F Sport and was just about to give it a good clean today when one of the bolts on the V-piece under the radiator just kept turning. So I thought I'll take the left-hand fairing off and carefully take the V-piece off with the left-hand fairing. All was going well until I found another seized bolt ...

leading article image
rating is 0

How to improve Honda CBR600RR’s mirrors

MCN, 14 March 2012 13:37

Q. Is it just me, or are the mirrors on CBR600RRs circa 2007 really crap? I get a lovely view of my arms and that’s it. Any ideas? A. Another reader, Barry Sylvester, had a similar problem but sorted it in 20 minutes thanks to a “piece of a sheet 8mm black pvc”. He filed and sanded a piece of ...

leading article image
rating is 0

Which Honda CBF250 sprocket to replace to raise gearing?

MCN, 28 October 2011 09:59

If you want to raise the gearing, which makes more difference (if any), an extra tooth on the gearbox sprocket or one fewer on the rear wheel sprocket? Will either option affect the length of the chain significantly on my Honda CBF250? Wrinklytoad, MCN forums Both options will alter the gearing, but an extra tooth on the front has a ...

leading article image
rating is 0

Honda VFR800's header pipe snapped

MCN, 09 August 2011 15:54

Q. I have a Honda VFR800FI, a 1998 model. The front header pipe has snapped right at the point it joins to the cylinder head so I've had to invest in the whole downpipe collector unit. I've never had my bike apart but I have a workshop full of tools and six mechanics to help me out so I should ...

leading article image
rating is 0

How to extract stuck VTR brake pins

MCN, 15 June 2010 16:40

jdw1964: I can't seem to get the pin out that holds the pads in on the front brakes of a 2002 Honda VTR1000. Is there a special tool or can you use a normal screwdriver? It doesn’t seem to want to budge with the latter even after spraying it with some WD40. Knightmoves: Try a gentle tap (and only gently) ...

Results

Compare Insurance

Save money by comparing quotes. It's quick and easy

Motorcycles for sale

 

It's only £13.99 to advertise your motorcycle on MCN

Sell your Motorcycle

Motorcycle pricing tool

New! Find used bike prices

MCN Shop

With over 18,000 products, MCN shop is the best place to buy your biking kit