Skip to content

Honda Motorcycle Products

You looked for...

and found 14 items

Matches found in Motorcycle Products

Results 1 - 10 of 14

leading article image
rating is 0

My Honda VFR750 won’t rev past 6000rpm

MCN, 26 November 2012 15:24

Q. My Honda VFR750FR revs and runs well in the first four gears, but struggles in fifth and sixth to get past 6000pm. It also backfires – especially at low revs. I've changed the fuel filters and air filter and the fuel pump is OK.Dr Gregory Haddock, email A. With 18 years under its belt chances are the rubber hoses ...

leading article image
rating is 0

How to remove a seized bolt from CBR600F Sport’s radiator

MCN, 07 June 2012 17:41

Q. I've a Honda CBR600F Sport and was just about to give it a good clean today when one of the bolts on the V-piece under the radiator just kept turning. So I thought I'll take the left-hand fairing off and carefully take the V-piece off with the left-hand fairing. All was going well until I found another seized bolt ...

leading article image
rating is 0

How to improve Honda CBR600RR’s mirrors

MCN, 14 March 2012 13:37

Q. Is it just me, or are the mirrors on CBR600RRs circa 2007 really crap? I get a lovely view of my arms and that’s it. Any ideas? A. Another reader, Barry Sylvester, had a similar problem but sorted it in 20 minutes thanks to a “piece of a sheet 8mm black pvc”. He filed and sanded a piece of ...

leading article image
rating is 2

Best way to paint Hornet’s wheels

MCN, 11 January 2012 11:11

My wheels are looking a bit tatty on my Hornet and I’m considering spraying them myself. However the wheels take a lot of crap from the road and I am worried it won’t be durable.Cairnsie13, MCN forums Powder coating is more durable than conventional paints, but it’s harder to get a colour match. However, a reputable firm can usually get ...

leading article image
rating is 2

Best all-weather tyres for a Honda CBR600F

MCN, 15 December 2011 12:53

Q. I bought an N-plate Honda CBR600F six months ago with Michelin Pilot 1s fitted that arejust about done after 5000 miles and three track days. I will be using the bike mainly for summer riding and a handful of track days in the dry and wet. I am considering replacing them with Dunlops, Michelins or Bridgestones. I like the ...

leading article image
rating is 0

Best road and track tyres for a Honda CB1000R

MCN, 17 November 2011 10:36

I have a 2011 Honda CB1000R ABS, and want to do track days, what tyres are best suited to being ridden to the circuit, do a track day and then ride home?Roearn, MCN Tyre forum Any of the new breed of sport tyres are up to those demands. There’s been a staggering increase in performance from just three years ago. ...

leading article image
rating is 0

Which Honda CBF250 sprocket to replace to raise gearing?

MCN, 28 October 2011 09:59

If you want to raise the gearing, which makes more difference (if any), an extra tooth on the gearbox sprocket or one fewer on the rear wheel sprocket? Will either option affect the length of the chain significantly on my Honda CBF250? Wrinklytoad, MCN forums Both options will alter the gearing, but an extra tooth on the front has a ...

leading article image
rating is 2.5

Honda Hornet 600's surprise backfire

MCN, 08 September 2011 16:22

Yesterday, when I went to start up my 1998 Honda Hornet 600, I got a massive backfire. It’s never happened before and I’m wondering if it’s anything to worry about (damaging valves, etc)? The bike ran fine afterwards, in fact it felt smoother. But I don’t know if that’s because I have changed the oil or it’s just in my ...

leading article image
rating is 0

Honda VFR800's header pipe snapped

MCN, 09 August 2011 15:54

Q. I have a Honda VFR800FI, a 1998 model. The front header pipe has snapped right at the point it joins to the cylinder head so I've had to invest in the whole downpipe collector unit. I've never had my bike apart but I have a workshop full of tools and six mechanics to help me out so I should ...

leading article image
rating is 3.5

Is Honda CG125 chain over-tight?

MCN, 09 August 2011 15:28

Q. When I spin the back tyre of my Honda CG125 in neutral I can hear a rumble and sometimes when I change down gears and don’t blip the throttle to match engine speed I get a “clanking” noise like the chain is slipping on the sprocket. I have set the chain tension to 20mm on the centrestand as it ...

Results

Compare Insurance

Save money by comparing quotes. It's quick and easy

Motorcycles for sale

 

It's only £13.99 to advertise your motorcycle on MCN

Sell your Motorcycle

Motorcycle pricing tool

New! Find used bike prices

MCN Shop

With over 18,000 products, MCN shop is the best place to buy your biking kit