Skip to content

Kawasaki Motorcycle Products

You looked for...

and found 19 items

Results 1 - 10 of 19

leading article image
rating is 4

Why is my almost-new Kawasaki Z1000SX rattling?

MCN, 07 June 2012 16:59

Q. I have a new Kawasaki Z1000SX with 900 miles on the clock, which has a faint rattle. It comes in when I am gently opening the throttle at low revs in the low gears. It’s similar to pinking or a tappet rattle. I am not labouring the bike at all, but it goes as the bike revs higher. I ...

leading article image
rating is 3

How to check Kawasaki ZZR600’s valve clearances

MCN, 21 March 2012 12:37

Q. I have a mint Kawasaki ZZR600 E1 which I am happily racking the miles up on. I do my own servicing and the valve clearances are coming up to be checked and reset. My Haynes manual has flagged up its difficulty with a four-spanner rating, so I wondered if you have got any tips to get me through this?James ...

leading article image
rating is 0

I need a bespoke header pipe

MCN, 26 January 2012 11:33

Q. I have an immaculate Kawasaki KLR650 with a Marvin stainless steel silencer that looks and sounds great. Marvin does not make a header pipe, so are there any exhaust firms who could manufacture a stainless header pipe to fit the Marvin components?Neil Brooker, MCN forums A. There are a few firms out there who can offer a one-off service, ...

leading article image
rating is 2

Why is my Kawasaki VN800 Classic not starting?

MCN, 11 January 2012 11:27

I've had a Kawasaki VN800 Classic for over 15 months now, and it had been running beautifully every day until a few months ago when it would just not start on the button, clicking loudly instead. I checked the battery was good (it still is), so then thought it was the starter, so I took it off and checked it ...

leading article image
rating is 0

Why are my ZZR1200's brakes sqealing?

MCN, 19 December 2011 09:54

Q. I have recently purchased a Kawasaki ZZR1200. I'm very pleased with it, but I have one annoying problem – the front brake squeals under light operation. I have removed the calipers, and the pistons are free. I have renewed the brake pads, putting a smear of copper grease on the backplate. The pads are free in the caliper. I ...

leading article image
rating is 0

Does my Kawasaki ER-6 battery need replacing?

MCN, 17 November 2011 10:29

My Kawasaki ER-6 gives a buzzing sound when I hit the starter button and that’s it. Could this mean that the battery needs replacing, as it sounds like it’s struggling to kick in.Shuks, email The buzzing noise you can hear is the starter relay, if there isn't enough power in the battery to turn the starter motor and engine then the ...

leading article image
rating is 5

Kawasaki ER-5 keeps stalling

MCN, 08 September 2011 16:53

I have a 2002 Kawasaki ER-5, the engine starts and runs perfectly, but as soon as you put it in gear and start to release the clutch the bike will stall, no matter how high the revs are. It's not the clutch as I've taken it apart to check it and it's OK. Is it possible that the spark plug ...

leading article image
rating is 1

Bodywork repair by Kas Racepaint

Steve Farrell, 29 July 2011 13:59

Bodywork repair by Kas Racepaint, £380 Time owned: One month What's good: My KR1S fairing had a big bit missing where a corner had snapped off the top half, while the bottom half had shattered boltholes making it impossible to join the two pieces together. Kas Racepaint fabricated and painted a new corner, fixed the holes and got the whole ...

leading article image
rating is 5

Cure for stuttering ZZR1100

Anonymous, 29 March 2011 11:14

My ZZR1100 was running rough and when I checked the valve clearances there were six tight on the exhaust side. I also balanced the carbs, and it’s now much smoother and responsive, but it sort of misses or stutters between two and four thousand revsAnon, email If it was OK just before you did all this work, check that all the ...

leading article image
rating is 1

My Kawasaki ZZ-R600 won’t tick over

MCN, 16 February 2011 10:44

Q. My 2000 Kawasaki ZZ-R600’s idle is all over the place and it’s cutting out at speed, too. I’ve tried to adjust the tickover using the screw, but it’s seized solid, so I’ve had to do it with the throttle cables themselves. Where do I start?Marc Chadwick, email A. If the tickover screw has seized up, then it’s probably fair to ...

Results

Compare Insurance

Save money by comparing quotes. It's quick and easy

Motorcycles for sale

 

It's only £13.99 to advertise your motorcycle on MCN

Sell your Motorcycle

Motorcycle pricing tool

New! Find used bike prices

MCN Shop

With over 18,000 products, MCN shop is the best place to buy your biking kit