Skip to content
and found 2454 items
Ask an Expert
Never seen a two stroke single go pop that big, got to have snapped a rod?
Hi all I was wondering if anyone can help???I have a 2005 suzuki sv1000s. I am getting a grinding noise when I change down through the gears and when I throttle off?? It started only on the lower gears but very quickly started doing the same in every gear! I would be very greatful if someone could help?? Thanks
HiEpic Fail on Mod 1 test for the third time today. 1st test put foot down on U Turn, 2nd and 3rd I missed cones on the slalom cos I didn't keep my head up.In the training yard I can do slaloms and U Turns time after time with no errors. On the test nerves kill me and that's it! I've booked test 4 but crisis of confidence looming.Any ideas out there how I can deal with this?Cheers.
Went out last week on my GSX1400 was riding steady overtook a grey Honda CRV in a 50 doing about 40 and it pisss this guy off to the extent he tailgates me about 12" behind flashing his lights a nd giving me the coffee bean shuffle,,I ignore his stupidity up to the point that he will not back off as the car slows in front I brake he brakes and when we pull away he steams up behind me again I gesture him to back off and this is like red rag to a bull he floors it and ...
Hey guys, I'm new here so any help is very appreciated. I have recently bought a headlight off the internet and the wiring colours on the headlight are completely different to my bikes wiring, I was hoping if someone could make some seance of it to me please I will include photos of my Haynes wiring diagram and the headlight wiring. Thanks!My bike is a yamaha xt125xAnd as you can see in the pictures the headlight unit had a dip light and a headlight with separate wiring; green, white, brown and blue. There's a green cable that come from each ...
I bought a simple little device from Amazon recently which has made tyre pressure checks much less awkward, so I thought I would recommend it here.Flexi connectorWhen you need it you screw it onto the tyre valve so the other end is much more accessible.The photo shows it in the middle with my Maplins mini-compressor and Draper analogue gauge with hold/release valve. I've tried all sorts over the years but this is the best combo so far.
i have a 86 suz vs700 intr. and i put on my starter relay and did not notice that one wire came off the one side and touched over to the other side so when i turned the key and went to start the bike it was smoking towards the bottom left side so i took off the neg batt cable quickly. i saw the wire and put it where it was suppose to go and tried it again and the starter wouldn't stop turning over.i noticed the relay was broken so i bought a new starter relay put in ...
I am wanting to get my valve timing done on my bandit 1200 k1 I have a fair idea just want someone to go through it with me, the intake valves are 0.10 to 0.15 and exhaust 0.18 to 0.23mm.Many thanks, regards Irwin
So I have an XTRS 125, and was wondering if i's worth fitting a Scottoiler? I do about 150 commuting miles per week through the city on it. Would it be worth the investment, or should I just stick to a clean once per week and oil after a wet run or once per week?
I've own my Repsol blade from new which is 3 years now and in that time sadly because it lives outside the stander exhaust has rusted quite badly so I've decided to treat the bike to a new exhaust, I liked the look of the carbon akrapovic slip on exhaust with link pipe that at the time I bought my bike some dealer were actually fitting for free but having looked into it this can is no longer available and to be honest the only akrapovic one that is comes in well over %XA31000 which is much more that I was thinking ...
Save money by comparing quotes. It's quick and easy
With over 18,000 products, MCN shop is the best place to buy your biking kit
Motorcycle Cover | Cheap Motorcycle Insurance | Moped Insurance | Scooter Insurance | 125 Insurance | Work Experience
Car Magazine | Empire | FHM | Parkers | LRO | Today's Golfer | Zoo
Bauer Consumer Media Ltd (company number 01176085, 1 Lincoln Court, Lincoln Road, Peterborough, England PE1 2RF)