Skip to content
and found 150 items
Ask an Expert
Hi allJust changed the sparks on my 2005 zx6r, think theyre the originals having done 17k miles ..http://i43.tinypic.com/j5ee76.jpgJust wanted to check if they look as you'd expect - i noticed they all have some black oil or fuel muck on the threads, although the first [left side] plug had noticably less as well as a darkened patch further down on the plug is that a warning sign of anythingThanks for any help
Hi, Bike is honda cmx250c, prob.wont tick over without choke on about an 1/4. when i try to get rid of the choke it revs higher then cuts out tryed to adjust tickover before cut out but just revs higher and cuts out , at this point engine is warm but wont restart without choke, when i open throttle it missfires in one cylinder. any ideas?....Conda
hi,got an 05 z750 ,want to put z1000 exhausts on ,(pipe on either side ) can any body help .cheers steve
hi i have a Honda cbf 125, got on it today put the key in the ignition the engine check light came on (for 2 seconds like normal) pressed the button to start it and nothing happened, just like a knocking noise from under the seat (from the battery). so I now can't start my bike at all can anyone please tell me what's wrong with it?
OK, I'm reading my Clymer manual trying to test my fan thermo switch on my old FZX 700. The manual explains that I need to place the thermo switch in water and heat the water up to 98 degrees Celsius where resistance should be infinite on the Ohm meter, so far so good. I then have to heat the water to 105 degrees Celsius where resistance should decrease and allow current to flow then allow it to cool back through the 98 degrees point where resistance should return in infinite. My question is; How do I heat water to 105 degrees Celsius ...
I dont know too much about engine performance. I'm looking to buy a 600(ish) bike to last me two years, but heard that restrictor kit's can cause certain engines to perform badly, even degrade. When looking to buy, is there anything I should completely avoid if im wanting to restrict to 47hp? Thanks for reading. :DP.S - Sorry if im spouting total rubbish
I need to reduce the lubricant temperature in a motorcycle engine.?I've been allotted this project in a motorcycle company in India in which I need to reduce the average temperature to which a lubricating oil gets heated up, in an engine for one of their models. Now I did see the flow path of ...
Bought a 2003 YAMAHA Dragstar last year on a whim, didn't use it a lot and have decided to this year. How do I check oil level? can't see a window and no dip on filler cap.
Hi new to this so would appreciate the help if possible. Right I have a 96 mk1 suzuki bandit its had a fill service 2 weeks ago but prior to this and still afterwards is a problem that is very annoying. The bike starts and runs fine until I try to open up the throttle at which point its seems likes its dumping aload of fuel into the system to which it cant burn off so the bike stutters and then the power kicks back in and it shoots off. Could anyone shed any light on this issue thanks.
I've got a 2001 gsx750f grey import and the advisory on the mot was the headlights. Can you swap the dip and main connectors around or is it worth forking out on a uk full headlight? also is it worth swapping the dash for a uk one, its already got the gizmo to read mph instead of kph?any help on this would most appreciated and if you know where to get them cheap.Thanks
Save money by comparing quotes. It's quick and easy
Compare and buy 100s of bargain priced products for you and your bike
Motorcycle Cover | Cheap Motorcycle Insurance | Moped Insurance | Scooter Insurance | 125 Insurance | Work Experience