Skip to content
and found 17 items
Ask an Expert
I have a faulty damper rod on a moto guzzi california II and wonder if there is a way to repair them? does anyone recondition them. there are so many different ones i wonder who makes the damper rods.i have read fac do some air replacements but should be fitted with progressive springs.any help and advice appreciated.Vinny
Need some advise on which is the best suspension settings for a CB1300 to improve the handling! anyone help ?
hi my dad is going to fit a 40mm lowering kit onto his 600 bandit 2004 model.after hes fitted it will he need to lower the front forks through the yolk by 40mm as well to have the same geometry as before .? any ideas.
Both fork legs have now blown seals. I am 18 stone and carry a pillion (my son who is 4 1/2 stone) I would like to get them refurbished and re-valved for my weight. Please can you let me know of any companies who you could recommend, that aren`t to expensive (but then it needs to be done). I would appreciate any help or advice.Many ThanksSteve
Will the mono shock fromm a 1990 model xj 600 fit a 1993 model, without any modification?
HiI`m currently sorting out my suspension and was looking at a nitron rear shock but i wonder if any of the brains out there would know if another shock from a different bike would fit and do just a good of job . I rarely do track days so i dont need anything to posh .thank you for your help christopher
Hey everyone I am taking my mrs pillion on my 1990 cbr600 quite a lot and realized that the bike was set up by the previous owner for his frame (tiny compared to me) Me and my partner both weigh around 12-12.5 stone and I know this is relatively close to the recommended max weight limit (think about 25lbs off it)So I am going to raise the pre load to its max as I spend about 70% of the time taking her pillion it seems to make sense to leave it set up for both of us.How exactly do I do ...
Hi all,Anyone know how easy (or difficult) it is to put either a ZX-9R B model front end, (forks and yokes) or an uprated ZX-7R front end on to a C model ZX-9R please?
Hi, I passed my test in June last year and brought a 2005 1050 sprint ST. As I%X92ve learnt a few things I%X92d like to tension the rear suspension a little (I have panniers etc. fitted for long M6 commutes). However, when coming to adjust the suspension I found it to be stuck solid (even trying to use a socket wrench). I%X92ve been advised by my local Dealer (Triumph) that there is every chance it will snap off should I try to move it now it%X92s seized. I%X92ve starting applying a little wd40 which I intend to do a regular intervals ...
Hi all,my k2 SV650s has just failed it's MOT due to this excessive play. The guy at the garage was rubbish and had no useful information except 'it may be just a nut that need tightening'. My question is this - is this likely to be an issue I can solve myself with a tool kit and day off, or do I need to book it in and spend?the handling has not felt particularly different since I bought it, though it's done 12k this year and it's my first bike so I have no comparison!Any advice gratefully received :-)
Save money by comparing quotes. It's quick and easy
Compare and buy 100s of bargain priced products for you and your bike
Motorcycle Cover | Cheap Motorcycle Insurance | Moped Insurance | Scooter Insurance | 125 Insurance | Work Experience