Skip to content
and found 363 items
Ask an Expert
HelloLast year I bought a Ktm 950 sm 2006 and I love it!The previous owner had the suspension set up to very stiff sports setting and although it works well with the bike, the setting is a bit too stiff for me.I am 5' 7" and the height of the bike is also an issue for me. I can manage but sometimes struggle, for instance at bike rallies on wet slippery surfaces.As well as some advise on softening the suspension, I am wondering if anything can be done with the suspension to lower the bike slightly?Any help or advice will ...
im fitting 40mm shorter drop links to my triumph tiger 800 ,and ive been told I have to bring the forks up through the yokes .does anybody know by how much I should raise them
Need some advise on which is the best suspension settings for a CB1300 to improve the handling! anyone help ?
I have a faulty damper rod on a moto guzzi california II and wonder if there is a way to repair them? does anyone recondition them. there are so many different ones i wonder who makes the damper rods.i have read fac do some air replacements but should be fitted with progressive springs.any help and advice appreciated.Vinny
hi my dad is going to fit a 40mm lowering kit onto his 600 bandit 2004 model.after hes fitted it will he need to lower the front forks through the yolk by 40mm as well to have the same geometry as before .? any ideas.
Both fork legs have now blown seals. I am 18 stone and carry a pillion (my son who is 4 1/2 stone) I would like to get them refurbished and re-valved for my weight. Please can you let me know of any companies who you could recommend, that aren`t to expensive (but then it needs to be done). I would appreciate any help or advice.Many ThanksSteve
I have a GSXR 1000 K9. Will dropping the yoke 10mm down the forks make much difference to my riding or handling ? I have bst wheels fitted, the difference is out standing.
Will the mono shock fromm a 1990 model xj 600 fit a 1993 model, without any modification?
HiI`m currently sorting out my suspension and was looking at a nitron rear shock but i wonder if any of the brains out there would know if another shock from a different bike would fit and do just a good of job . I rarely do track days so i dont need anything to posh .thank you for your help christopher
Hey everyone I am taking my mrs pillion on my 1990 cbr600 quite a lot and realized that the bike was set up by the previous owner for his frame (tiny compared to me) Me and my partner both weigh around 12-12.5 stone and I know this is relatively close to the recommended max weight limit (think about 25lbs off it)So I am going to raise the pre load to its max as I spend about 70% of the time taking her pillion it seems to make sense to leave it set up for both of us.How exactly do I do ...
Save money by comparing quotes. It's quick and easy
Compare and buy 100s of bargain priced products for you and your bike
Motorcycle Cover | Cheap Motorcycle Insurance | Moped Insurance | Scooter Insurance | 125 Insurance | Work Experience