Skip to content

Ask an Expert plastic on exhaust New rider

You are in... Forums > Ask an Expert > New rider > plastic on exhaust

Got something to say?

Got something to say?

Go to most recent reply

richardhyde010

Joined:

Apr 12

Posts: 17

plastic on exhaust

hey to anyone who can help. i have managed to get plastic from my bike cover on the exhaust (I thought i left it long enough to cool.) and now it is stuck on fast. the more  annoying thing is i only put the new exhaust on last week. so the question is what is the best way to remove it. thank you all 

Reply to this Topic  
  • Posted 2 years ago (12 October 2012 11:46)

Post a message in New rider

Fields marked with an asterisk * are required

   

Please note. You cannot submit more than 4000 characters as a message.

Upload image(s) from your computer (up to 3 images)

  1.  
  2.  
  3.  

Terms of use

Use of our community areas and forums is subject to important terms of use. By joining our community and using the features you agree to be bound by these terms. See terms of use below. 

Cancel
eatcs01

Joined:

Aug 02

Posts: 3270

eatcs01 says:

plastic pipes

Acetone.
It's HIGHLY flammable.
Be careful.

Reply to this Topic
jahagon

Joined:

Mar 10

Posts: 100

jahagon says:

Melt it again

I'd run the bike until the exhaust gets hot and the plastic becomes squishy again. Then try and scrape it off with something that won't melt and won't mark your exhaust (it sounds odd but a wooden stick would work). That or use a kitchen blow torch if you've got one. Then use a metal polish to get rid of any discolouration and remaining crud (I use Autosol to remove road tar from my bike's exhaust, takes some time but works a treat)

Reply to this Topic
SlowLearner

Joined:

Feb 10

Posts: 1953

SlowLearner says:

I'm with eatscs01:

Acetone will remove it, but ONLY do it when the exhaust is totally cold.  Use it sparingly too.

Sounds like you're more concerned about the exhaust than the cover - in which case, just run the engine for a few minutes, gently peel off the cover, and then forget about it for a bit.  Most of the remaining plastic will burn off.   The burnt bits left after a good day out will probably just pitch off really easily once the exhaust has cooled again - it's not going to damage the metal.

Reply to this Topic
DH1900

Joined:

Oct 12

Posts: 11

DH1900 says:

Freeze it

You could try a freeze spray to make the plastic brittle and the metal contract (plastics generally have a lower coefficient of thermal expansion than metals) but be careful, metals become brittle when they're cold too. That's why you can freeze and smash a brass lock.

Reply to this Topic

Page

Compare Insurance

Save money by comparing quotes. It's quick and easy

Motorcycles for sale

 

It's only £13.99 to advertise your motorcycle on MCN

Sell your Motorcycle

Motorcycle pricing tool

New! Find used bike prices