Skip to content

General Dyno Reading General

You are in... Forums > General > General > Dyno Reading

Got something to say?

Got something to say?

Go to most recent reply

MarcusMarsh

Joined:

Aug 09

Posts: 2693

MarcusMarsh says:

Dyno Reading

Had the FZS1000 on a dyno run today. 125.7 BHP and 71.7 Ft-lb of torque at 10,000 rpm. 

Not bad!   :biggrin:


Reply to this Topic  
  • Posted 142 days ago (06 March 2014 13:33)

Post a message in General

Fields marked with an asterisk * are required

   

Please note. You cannot submit more than 4000 characters as a message.

Upload image(s) from your computer (up to 3 images)

  1.  
  2.  
  3.  

Terms of use

Use of our community areas and forums is subject to important terms of use. By joining our community and using the features you agree to be bound by these terms. See terms of use below. 

Cancel
dave_c

Joined:

Aug 06

Posts: 4474

dave_c says:

That sounds

very healthy :smile Is that figure at the back wheel or flywheel?

Reply to this Topic
MarcusMarsh

Joined:

Aug 09

Posts: 2693

MarcusMarsh says:

Dyno Reading

That's back wheel. I think that Yamaha claimed 140-odd at the crank.

Reply to this Topic
dave_c

Joined:

Aug 06

Posts: 4474

dave_c says:

Very impressive

must be a quick bike!

Reply to this Topic
spondonste

Joined:

Aug 02

Posts: 2722

spondonste says:

Fluff and manipulation

The manufacturers re-calibration a few years ago for imaginary horsepower figures was a great marketing ploy for them. My TL1000 was recently measured at 128.7BHP at the rear wheel. I take it I can now claim its a 145BHP TL1000?

Reply to this Topic
snev

Joined:

Jan 11

Posts: 7649

snev says:

^^^^^^

my Busa was shown to have 187bhp at the rear after a Dyno session..... with the usual pipe, PC and filter mods... this equates to @ 210 at the crank or so I was told by the chap at Crescent... (194 @ crank claimed by Suzuki without the mods).... met a bloke a while back reckoned his Gixer thou made 240 with the same mods....it was a 2007 bike......:shock:

Reply to this Topic
MarcusMarsh

Joined:

Aug 09

Posts: 2693

MarcusMarsh says:

FZS1000

Yes, it is quick. But more importantly it rides very well.  It has an Ivan's jet kit on it to correct the compromises in the fuelling required to get the bike through the noise and emissions regulations.  The power and torque outputs are very smooth with no dips or flat sports and a good mid-range.  This makes it very sweet to ride.

I just looked at the dyno run from a few years back before the kit was fitted.  Peak power was 118 bhp with holes all over the power delivery.  

[This Reply has been modified by the Author]

Reply to this Topic
Piglet2010

Joined:

Oct 11

Posts: 2248

Piglet2010 says:

240 HP from a modified

GSX-R1000 hardly seems probable - after all a Yamaha YZF-M1 only puts out 250-something HP, and the Honda RCV1000R Open Class bike has a claimed 234-HP.

Reply to this Topic
snev

Joined:

Jan 11

Posts: 7649

snev says:

yeh pigles

I laughed too....:biggrin:

Reply to this Topic

Page

Compare Insurance

Save money by comparing quotes. It's quick and easy

Motorcycles for sale

 

It's only £13.99 to advertise your motorcycle on MCN

Sell your Motorcycle

Motorcycle pricing tool

New! Find used bike prices